The Exclusive CleanCut Distributor in Canada.
Customer Sales & Support
Menu
Menu
Menu
Customer Sales & Support
$595.00
Availability: IN STOCK
The CleanCut Convertible gives you the choice of having a step-in shower, or you can insert the easy to use water-tight plug and enjoy a full bath. The CleanCut Convertible is unique in that it provides a wide entry point if you want a walk-in shower, or it allows you to easily convert your tub back to a full tub in only seconds. Removes approx. 8″ from the top of your tub and has a 18.75″ wide opening!
Large: (one size only) Fits tubs up to a 6″ top rail width and a maximum width of 7″ at the 10.5″ point down on the inside of your tub.
*Tip on measuring the bottom width. Make a mark 10.5″ down on the inside of your tub where you plan to install the CleanCut Convertible at the widest point. Using a 2 foot level put the bottom of the level on the mark you made and hold the level vertically making sure it’s level. Using a measuring tape, measure from the edge of the level that’s facing the outside of your tub to the outside top rail. This will give you the bottom measurement.
• CleanCut Convertible unit
• 2 part support box structure
• 2 tubes of industrial grade waterproof adhesive
• Adhesive angle extension
• Waterproof wrap
• Cardboard cutting template
• Installation guide
Ships within 24 business hours via FedEx Ground.
| Colour | White, Beige |
|---|---|
| Size | Large |
1 of 9: Video Series Overview
2 of 9: Product Overview
3 of 9: Measuring Your Bathtub – Product Sizing
4 of 9: Tools and Materials
5 of 9: Preparing the Tub Area for Installation
6 of 9: Cutting the Tub
7 of 9: Measure and Trim the CleanCut™ Product
8 of 9: Support Structure & Waterproof Membrane Installation
9 of 9: Flaming, Applying Adhesive & Final Steps!
Whether you have a steel, fiberglass or cast-iron bathtub it can be converted to a step-in shower. This allows our product to be installed for approximately 20% of the cost of a tub renovation, saving you money.
Need to stand on the step? No problem. All CleanCut products have a built-in anti-skid surface, not a sticker that may peel off over time.
Each CleanCut kit includes a cardboard cutting template, 2 tubes of industrial grade adhesive, nozzle guard, support box structure, written instruction guide and as always, free Canada-Wide shipping!
Since 2000 CleanCut products have been installed in tens of thousands of homes and senior care facilities across Canada and the United States.
All CleanCut products are made of a non-recycled BPA-Free polyethylene, this in conjunction with our patented and proprietary support box structure, will ensure your tub cutout will last for many years to come!
Herberto R. Hope, BC
it looks like it is really good quality,i did get this and installed it for my wife she broke her left leg left foot and arm and recovery is going to be a long time,this is going to make it easyer for her to get in the tub and shower
Vern P. Calgary, AB
Solid product, excellently finished, exactly as ordered. My mistake was in the colour that I chose! They are exchanging it with no hassle.
Joe H. St. Thomas, ON
Great product! A much better option for my parents rather than replacing the entire tub/shower surround. Quite simple to install after watching the 9 part video series on your site. Very straight forward and thorough explanations. My tub was fiberglass and easy to work with. I was nervous about cutting the rough opening but it truly is a "rough" opening and does not need to be perfect as it is never seen and the step is much larger than this opening, so imperfections are well hidden. The important thing is to spend the extra time to precisely cut the step to match the tub contours, this was the critical part to make it fit just right. Making templates as you recommended using bristol board was the perfect solution, it turned out great! The same can't be said for my lousy final silicone/sealant job....I've never been good at that! Haha. Thanks again Clean-cut, you've made my fathers tub entry and exit much safer.
Gary B. Parksville, BC
Thanks for good product. Instructions were easy follow. Perfect solution for us. DIY . Ourselves Gary
Egle S. Egbert, ON
Fairly easy to install. Saved us $ on having to install a walk-in shower. Much safer to get in and out. Highly recommend.