CleanCut Step
For many standard bathtubs.
- Opening width (top)
- 24 in.
- Height removed from tub wall
- About 8 in.
- Sizes
- Small, Medium, Large
- Keeps full baths
- No

St. John's · Mount Pearl · Paradise · CBS
Across St. John's and Conception Bay South, Imperial Bathrooms can link you with an independent installer experienced with CleanCut products who serves the area. A CleanCut cutout lowers one section of the tub wall, so getting in and out takes less effort and no renovation is involved.
Imperial Bathrooms connects you with an independent installer experienced with CleanCut products. Installers are independent businesses, not Imperial Bathrooms employees. Every request comes to us first, and you'll receive a response within 2 business hours.
The area spans the city and the Conception Bay shore. Mount Pearl and Paradise sit right next to St. John's, Torbay lies to the north, and Portugal Cove-St. Philip's is on the Conception Bay side. Route 60 follows the south shore of Conception Bay through Conception Bay South and on to Holyrood. Bay Roberts and Carbonear, farther around the bay, are not currently included.
Western Newfoundland is a long drive away and isn't part of this area.
When you get in touch, a rough idea of how tall your tub is helps the installer talk through options such as the Ultra-Low or the Convertible. If you'd rather install it yourself, DIY kits ship free across Canada.
The bathtub stays in place. One section of the wall is cut away and a CleanCut insert is fitted and sealed into the opening.
Stepping in no longer means lifting your leg over the full height of the tub wall.
The CleanCut Convertible has a removable watertight insert, so the tub can still be filled for a bath.
Falls are the leading cause of injury-related hospitalizations among Canadians aged 65 and older (Public Health Agency of Canada, 2022). What the research shows →
CleanCut
Which model fits depends on how tall your tub is, how wide its wall is and whether you want to keep full baths. An installer confirms the fit before quoting.
For many standard bathtubs.
For medium-height soaker tubs that need more height taken off than the Step.
For taller, high-profile tubs. The lowest step-in CleanCut option.
A lower step-in opening with a removable watertight insert, so you can still take a bath.
Use the short form or call 1-855-707-9777. It takes about a minute.
You'll receive a response within 2 business hours, and Imperial Bathrooms puts you in touch with an independent installer serving your area.
The installer checks your tub, recommends the right CleanCut product and quotes the product and installation together.
Independent installers set their own prices. The quote you receive will include the CleanCut kit and complete professional installation, so there's no need to purchase the kit separately. Pricing may vary depending on the CleanCut model required, your bathtub's material and condition, and any additional work needed, such as removing existing glass doors.
Doing it yourself? DIY kits ship free across Canada, with prices on each product page. Shop DIY kits →
Send the short request form or call 1-855-707-9777. You'll receive a response within 2 business hours, and Imperial Bathrooms connects you with an independent installer experienced with CleanCut products who serves your area. The installer can confirm which CleanCut product fits your tub and give you a quote for the product and the installation.
It depends on your tub's height, the width of the tub wall at the top rail and lower down, and whether you want to keep full-bath use. The Step suits many standard tubs, the Deep Step suits medium-height soaker tubs, the Ultra-Low is for taller high-profile tubs, and the Convertible keeps the option of a bath. An installer can confirm the fit, or you can compare your measurements with the sizing guide.
Approximately how much is removed from the tub wall: about 8 inches with the Step and the Convertible, about 10.5 inches with the Deep Step, and about 13.25 inches with the Ultra-Low. Your final step-over height depends on how tall your tub is to begin with.
Yes. Cast iron is cut with a diamond-blade grinder and takes more effort than acrylic or steel, which is why professional installation is recommended for cast-iron tubs.
No. When an independent installer handles the job, their quote can include both the CleanCut product and the installation. Buy a DIY kit only if you, or a contractor you hire yourself, will do the work.
Bay Roberts is within the St. John's & Conception Bay South service area. Carbonear is beyond this area's driving distance; you can still send a request with your postal code, and Imperial Bathrooms will check whether an independent installer can reach your address.
Send your request and you'll receive a response within 2 business hours. Imperial Bathrooms will then connect you with an independent installer working around St. John's and Conception Bay South.
Complete the short form below, and we'll help connect you with an independent installer in your area who can provide a quote for the CleanCut kit and professional installation.
You can expect a response within 2 business hours. You may hear from Imperial Bathrooms or an independent installer by phone or email.