The Exclusive CleanCut Distributor in Canada.
Customer Sales & Support
Menu
Menu
Menu
Customer Sales & Support
$495.00
Availability: IN STOCK
Bathtub to step-in shower conversions have never been easier and more affordable than with the CleanCut Deep Step tub to step-in shower conversion kit. Simply cut a section out of your existing steel, cast iron or acrylic bathtub and custom fit the resulting opening with the CleanCut Deep Step. Removes approx. 10.5″ from the top of your tub and has a 24″ wide opening! Please note: the minimum inside depth of your tub must be at least 13″ for the CleanCut Deep Step to be installed.
Large: Fits tubs up to a 6″ top rail width and a maximum width of 7.25″ at the 11.75″ point down on the inside of your tub.
Extra-Large: Fits tubs up to a 8″ top rail width and a maximum width of 9″ at the 11.75″ point down on the inside of your tub.
*Tip on measuring the bottom width. Make a mark 11.75″ down on the inside of your tub where you plan to install the CleanCut Deep Step at the widest point. Using a 2 foot level put the bottom of the level on the mark you made and hold the level vertically making sure it’s level. Using a measuring tape, measure from the edge of the level that’s facing the outside of your tub to the outside top rail. This will give you the bottom measurement.
• CleanCut Deep Step unit
• 2 part support box structure
• 2 tubes of industrial grade waterproof adhesive
• Adhesive angle extension
• Cardboard cutting template
• Installation guide
Ships within 24 business hours via FedEx Ground.
| Colour | White, Beige |
|---|---|
| Size | Large, Extra-Large |
1 of 9: Video Series Overview
2 of 9: Product Overview
3 of 9: Measuring Your Bathtub – Product Sizing
4 of 9: Tools and Materials
5 of 9: Preparing the Tub Area for Installation
6 of 9: Cutting the Tub
7 of 9: Measure and Trim the CleanCut™ Product
8 of 9: Support Structure & Waterproof Membrane Installation
9 of 9: Flaming, Applying Adhesive & Final Steps!
Whether you have a steel, fiberglass or cast-iron bathtub it can be converted to a step-in shower. This allows our product to be installed for approximately 20% of the cost of a tub renovation, saving you money.
Need to stand on the step? No problem. All CleanCut products have a built-in anti-skid surface, not a sticker that may peel off over time.
Each CleanCut kit includes a cardboard cutting template, 2 tubes of industrial grade adhesive, nozzle guard, support box structure, written instruction guide and as always, free Canada-Wide shipping!
Since 2000 CleanCut products have been installed in tens of thousands of homes and senior care facilities across Canada and the United States.
All CleanCut products are made of a non-recycled BPA-Free polyethylene, this in conjunction with our patented and proprietary support box structure, will ensure your tub cutout will last for many years to come!
Marty M. St. Peter's, NB
Fit like a glove although it was a DIY project so I probably took longer than a professional installer but I took my time, the adhesive was a challenge making it look clean but it worked out fine.
Brad B. Selkirk, MB
It was an inexpensive way to make the bathtub accessible for my close neighbor, who had knee surgery and could not get her leg over the bathtub wall. We are pleased with the with the finished product and will recommend this product to others for sure!