CleanCut Step DIY Bathtub to Step-in Shower Cutout Kit.
Converts Your Existing Bathtub into a Step-in Shower!
Bathtub to step-in shower conversions have never been easier and more affordable than with the CleanCut Step tub to step-in shower conversion kit. Simply cut a section out of your existing steel, cast iron or acrylic bathtub and custom fit the resulting opening with the CleanCut Step. Removes approx. 8″ from the top of your tub and has a 24″ wide opening!
CleanCut Step Sizing
Small: Fits tubs up to a 4″ top rail width and a maximum width of 4.75″ at the 9.75″ point down on the inside of your tub.
Medium: Fits tubs up to a 4.5″ top rail width and a maximum width of 5.75″ at the 9.75″ point down on the inside of your tub.
Large: Fits tubs up to a 6″ top rail width and a maximum width of 7.25″ at the 9.75″ point down on the inside of your tub.
*Tip on measuring the bottom width. Make a mark 9.75″ down on the inside of your tub where you plan to install the CleanCut Step at the widest point. Using a 2 foot level put the bottom of the level on the mark you made and hold the level vertically making sure it’s level. Using a measuring tape, measure from the edge of the level that’s facing the outside of your tub to the outside top rail. This will give you the bottom measurement.
CleanCut Step DIY Kit Includes
• CleanCut Step unit
• 2 part support box structure
• 2 tubes of industrial grade waterproof adhesive
• Adhesive angle extension
• Cardboard cutting template
• Installation guide
Ships within 24 business hours via FedEx Ground.
Ruby M. Toronto, ON
I had the step through installed after my sister got one for her bathtub. A great idea and a blessing!
Jim & Helen M. Timmins, ON
So very pleased with this product! It has made our lives so much easier, Thank-you imperialbath!
Richard F. Brandon, MB
The step has just been installed and it appears to be what we wanted. Only gave it 4 stars as it hasn't been used it so do not know how it will last. If it wears well then it would be a 5 star rating.
Jim D. Godfrey, ON
Overall not that complicated to install ,you should tell installers that the glue - sealer dries very fast .
Reply from Imperial Bathrooms:
Thank you Jim for taking the time to share your thoughts on your installation. Your feedback on the adhesive dry time is valuable. We will pass this information on to the manufacture to maybe include the quick dry times on the installation guide that's provided in the kit. As mentioned in the installation video applying the adhesive should be applied in sections, so it gives you time to smooth it over. When applying the adhesive it should be done in sections and smoothed over with a gloved finger within approx. 1 minute.
1. Left side, smooth over
2. Right side, smooth over
3. Bottom inside, smooth over
4. Outside bottom, smooth over and done!
We will look into making this clearer in the installation guide, as well as on the adhesive tube itself. Thanks again for taking the time to write us a review and we hope you're enjoying your new CleanCut Step!
Judy G. St. Albert, AB
I love to take showers again! The step has allowed me to keep my independence.